Banner

新闻详情

Home > News Center > Content

Intersecting wire cutter manufacturers share their structural types

Edit:Xuzhou Yahong CNC Equipment FactoryUpDate:2018-10-24

Intersecting wire cutter operating procedures and structure types

At present, the industrial use of intersecting wire cutting machines is very extensive, and the intersecting wire cutting machine has made outstanding contributions in the development of modern industry. The new intersecting wire cutter not only improves production efficiency but also guarantees production quality. The numerical control control interface of the CNC intersecting wire cutting machine is combined with graphics and data. The operation is very simple: the operator only needs to input the parameters such as the diameter of the main pipe and the branch pipe, the intersecting angle, the cutting speed and other parameters into the computer and then press the “Start” button. It is capable of automatic operation such as auto-ignition, preheating, and cutting. The software has designed a reasonable cutting lead-in line to ensure the quality of the cutting surface, and the parameters after each cutting can be saved as a file for later use of the same workpiece.
The numerical control intersecting wire cutting machine adopts cylindrical coordinate coefficient control, and the number of control axes is five-axis four-linkage. With Chinese interface, parameter input and man-machine dialogue function, fixed angle groove face cutting function, variable angle groove face cutting function, pipe non-circumference and eccentricity compensation function, online and offline automatic ignition, preheating, piercing function, cutting Speed ​​change automatic control function, etc.

The structure of the intersecting wire cutter is as follows:
A. The size of the web has two parameters: the transverse effective cutting width and the longitudinal effective cutting length. The size of the web has two parameters: the transverse effective cutting width and the longitudinal effective cutting length.
1. In addition to the above micro-numerical control, in general, the size of the web should be considered in the size of the steel plate. After the steel plate is moved in place, it is hoped that the CNC cutting machine can cut it at one time.

2. The micro-CNC that puts the equipment on the steel plate for mobile cutting should consider two aspects: First, the size of the part should ensure that one part can be cut at one time; Second, the width of the steel plate, it is hoped that the equipment is placed on the steel plate, The length of the longitudinal cut cuts the lateral width of the steel plate to reduce the number of movements of the device. 2. Cutting method The cutting method can be classified from different angles. The cutting method can be classified from different angles. Flame cutting, cutting, flame and plasma cutting machine; flame cutting, plasma cutting, flame and plasma cutting machine; dry plasma cutting, underwater plasma cutting; plasma cutting, underwater plasma cutting; CNC and straight strip Dual-purpose cutting machine; CNC and straight-line dual-purpose cutting machine; CNC intersecting wire cutting machine.

3. Structure Form The structure of the equipment is available in cantilever type, gantry type and desktop type. The structure of the equipment is available in cantilever type, gantry type and table top. The cantilever structure, the equipment is easy to move and install, and does not need to occupy a fixed factory building, and the equipment cost is low.

The above is the analysis of the structure of the intersecting wire cutting machine manufacturers , welcome to inquire.