Banner

Blue and yellow overall desktop CNC plasma cutting machine

Blue and yellow overall desktop CNC plasma cutting machine
Blue and yellow overall desktop CNC plasma cutting machine

This type of CNC cutting machine is a blue and yellow integral desktop plasma and flame cutting machine of Xuzhou Yahong CNC Equipment Factory. The new desktop plasma cutting machine is a desktop gantry structure, and the whole working table surface adopts a whole rim structure, which has the characteristics of stable operation and long service life; the model adopts optical axis linear guide and bilateral drive.


working principle


1. The machine frame structure mainframe consists of a beam and two longitudinal end frames. The machine frame is composed of end frames and beams, and the longitudinal and lateral moving devices are all equipped with drag chains. The mechanical part realizes high-precision rack and pinion transmission for smooth transmission. The longitudinal guide rails are made of high-precision fine-grained guide rails. The precision-machined slide rails are fastened to the steel frame with the support and equipped with adjustment bolts for installation and adjustment. The longitudinal drive system is mounted in the longitudinal end frame, and the low position design makes the drive more reasonable and stable. The front end of the longitudinal end frame has two rolling wheels that can smoothly roll along the guide rails. The front and rear ends are equipped with rail scrapers to ensure that there is no debris on the surface of the guide rail. To ensure the guiding precision of the machine, the machine is added in the lateral drive and the torch. A high-strength linear guide is provided. Precision machined gears and racks ensure vertical and lateral drive accuracy and eliminate clearance.

2. The drive of the machine-driven machine is realized by a reliable stepper motor drive system. The longitudinal and lateral drive units are composed of drive gears and precision racks. The meshing between the gears and the racks automatically eliminates the gap, ensuring high precision in the continuous motion of the machine.

Technical Parameters

Serial number

project

Quantity specification

1

Machine tool gauge ( mm )

2000

Effective cutting width

1500

2

Machine tool rail length ( mm )

3500

Effective cutting length

3000

3

Drive mode

bilateral

4

Lateral moving body

Group 1

5

Plasma torch

1

6

CNC system

1 set

7

Horizontal pneumatic cable drive (towline)

1 set

8

Longitudinal pneumatic cable drive (towline)

1 set

9

Automatic programming nesting software (France TYPE3 CRACK)

1 set

10

Plasma power supply 100A

1 set

11

Cutting method

Plasma

12

Cutting thickness

0.5-12mm

13

Torch lifting stroke ( mm )

1-50mm

14

Plasma cutting speed

15m/min

15

Straight line repeatability

±0.2mm/10m

16

Ambient temperature

-5 to 45 ° C

17

Relative humidity

<95%>

18

Surroundings

Ventilation, no major impact

19

voltage

220V\380V ±10%

20

Power frequency

50Hz