Classic Xiaolongmen CNC plasma cutting machine

The classic Xiaolongmen CNC plasma flame cutting machine is a small one in the gantry CNC cutting machine . The effective cutting width is 2.5m. The longitudinal cutting distance can be lengthened or shortened according to the user's needs. Standard single flame or single plasma torch. Multiple cuts can be configured according to user requirements, and can also be configured for flame and plasma cutting; optional automatic height adjustment system. Xiaolongmen CNC cutting machine is the middle product of cantilever type CNC cutting machine and big gantry type CNC cutting machine. It is driven by bilateral and the price is lower than that of Dalongmen cutting machine. It is a good choice for cutting small steel plate.
12. One-time import and export of multiple files, saving disk reading time.
13, date, week, clock display.
14, with a parameter backup function to prevent loss of parameters due to improper operation, you can restore system parameters at any time, let you rest assured to use.
15, online upgrade function, help you update the system at any time, use new features
16. Supports 4 modes of oxygen gas, plasma, dusting and demonstration.
17, all kinds of processing parameters are complete, can meet different processes.
18, oxygen gas and plasma input and output are controlled separately, without mutual interference.
19. Support edge cutting and reduce the number of piercing, thus protecting the cutting nozzle, saving time, improving efficiency and reducing cost.
20, in the movement can be accelerated in real time according to the cutting situation.
21. According to the thickness of the steel plate, the speed limit can be automatically adjusted at the corner to effectively prevent over-burning and ensure the cutting quality.
22, Dsp high-speed high-precision interpolation control, high-speed operation, stable operation, low noise.
23, line selection and selection function, can be cut from any point according to our needs.
24, arbitrarily set the starting speed, lifting speed time
25, "offset cutting" function, to avoid the waste of the board caused by the wrong calculation of the discharge.
26. Different management rights and corresponding passwords can be set to maintain the rights and interests of management.
27, remote control can be carried out remotely, front and rear, and cutting motion start, stop and other actions. (optional)
Technical Parameters
Serial number | project | Quantity specification |
1 | Machine tool gauge ( mm ) | 2500 |
Effective cutting width | 2000 | |
2 | Machine tool rail length ( mm ) | 4500 |
Effective cutting length | 4000 | |
3 | Drive mode | bilateral |
4 | Lateral moving body | Group 1 |
5 | Flame single torch | 1 |
7 | CNC system | 1 set |
8 | Horizontal pneumatic cable drive (towline) | 1 set |
9 | Longitudinal pneumatic cable drive (towline) | 1 set |
10 | Automatic programming nesting software (France TYPE3 CRACK) | 1 set |
12 | Cutting method | Oxypropane, plasma |
13 | Flame cutting thickness ( mm ) | 6-200 |
14 | Plasma cutting thickness ( mm ) | Quality cutting 0.5-12mm |
Perforation cutting: 0.5-12mm | ||
Large cutting 20mm | ||
15 | Torch lifting stroke ( mm ) | 1-150mm |
16 | Plasma cutting speed | 10m / min |
17 | Flame cutting speed | 50~700mm/min |
18 | Torch lifting distance | ≤200mm |
19 | Straight line repeatability | ±0.2mm/10m |
20 | Ambient temperature | -5 to 45 ° C |
twenty one | Relative humidity | <95%>95%> |
twenty two | Surroundings | Ventilation, no major impact |
twenty three | voltage | 220V\380V ±10% |
twenty four | Power frequency | 50Hz |