Banner

Portable cutting machine

Portable cutting machine
Portable cutting machine

Plasma is a gas that is heated to a very high temperature and is highly ionized. It transfers the arc power to the workpiece. High heat causes the workpiece to melt and be blown off, forming a working state of plasma arc cutting.

After the compressed air enters the torch, two channels are distributed from the air chamber to form a plasma gas and an auxiliary gas. The plasma gas arc acts to melt the metal, while the auxiliary gas cools the various components of the torch and blows away the molten metal.

The cutting power supply consists of two parts: the main circuit and the control circuit. The electrical principle: the main circuit includes a contactor, a three-phase power transformer with high leakage resistance, a three-phase bridge rectifier, a high-frequency arcing coil and a protection component. The high-leakage resistance is caused by the steep external power characteristics. The control circuit completes the entire cutting process through the push button switch on the torch:

Pre-ventilation - main circuit power supply - high frequency arc starting - cutting process - arc - stop.

The power supply of the main circuit is controlled by the contactor; the short-circuit of the gas is controlled by the solenoid valve; the control circuit controls the high-frequency oscillator to ignite the arc, and stops the high frequency after the arc is established.

In addition, the control circuit also has the following internal locking function: the thermal switch action, stop working.